Product Detail

Working Principle

Channels are formed between the plates and the corner ports are arranged so than the two media flow through alternate channels. The heat is transferred through the plate between the channels, and complete counter-current flow is created for highest possible efficiency. The corrugation of the plates provides the passage between the plates, supports each plate against the adjacent one and enhances the turbulence, resulting in efficient heat transfer.

Standard Design

Plate heat exchanger consists of a pack of corrugated metal plates with portholes for passage of the two fluids between which heat transfer will take place.

The plate pack is assembled between a fix frame plate and movable pressure plate and compressed by tightening bolts. The plates are fitted with gasket which seals the interpolate channel and directs the fluids into alternate channels. The number of plates in determined by flow rate, physical properties of the fluids, pressure drop and temperature program. The plate corrugations promote fluid turbulence and support the plate against differential pressure.



 

The plate and pressure plate are fixed between upper bar and lower bar, both of which are fixed to a support column.

Connections are located in the frame plate or, if either or both fluids make more than a single pass within the unit, in the frame and pressure plates.

Model	BR6TS	BR6TL	BR10TL	BR20TS	BR20AK	BR20TB	BR22P	BR26P	BR25MX	BR4S	BR8S
Height, H, (mm)	710	1270	1889	1420	1450	2150	930	930	2595	473	748
Width, W, (mm)	420	325	485	760	780	785	360	260	920	200	200
Vertical connection dist., VC, (mm)	381	1037	1337	700	930	1480	592	592	1939	381	656
Horizontal connection dist., HC, (mm)	205	140	226	365	365	355	136	136	439	70	70
Connection size, flange (mm)	70	65	100	200	200	200	70	70	200	25	30
Max flow rate, (kg/s)	20	20	50	170	170	200	20	20	190	2.5	3
Max temperature, (ºc)	180	180	180	180	180	180	180	180	160	180	180
Max pressure, (barg)	16	16	16	16	16	16	16	16	16	16	16
Flow principle	Parallel	Parallel	Parallel	Parallel	Parallel	Parallel	Parallel	Parallel	Parallel	Parallel	Parallel
Model	BR21S	BR22S	BR43S	BR65S	BR81S	BR100S	BR121S	BR13G	BR16G	BR18G	BR26G
Height, H, (mm)	1069	1069	1400	1700	1766	2098	2265	832	832	1050	1110
Width, W, (mm)	480	480	790	750	970	750	970	320	320	370	450
Vertical connection dist., VC, (mm)	719	719	791	1091	1080	1489	1490	592	592	822	779
Horizontal connection dist., HC, (mm)	225	225	395	395	480	395	480	135	135	135	226
Connection size, flange (mm)	100	100	200	200	300	200	300	50	50	70	100
Max flow rate, (kg/s)	50	50	170	170	450	170	450	15	15	20	50
Max temperature, (ºC	180	180	180	180	180	180	180	180	180	180	180
Max pressure, (barg)	16	16	16	16	16	16	16	16	16	16	16
Flow principle	Parallel	Parallel	Parallel	Parallel	Parallel	Parallel	Parallel	Parallel	Parallel		Parallel

Model	BR42G	BR51G	BR60G	BR85G	BR91G	BR100G	BR100NT	BR4VT	BR10VT	BR20VT	BR40VT
Height, H, (mm)	1520	1730	1700	1985	2390	2075	1120	575	955	1495	1890
Width, W, (mm)	450	585	825	1060	626	755	550	185	295	630	720
Vertical connection dist., VC, (mm)	1189	1143	910	1140	1800	1478	797	480	691	868	1227
Horizontal connection dist., HC, (mm)	226	300	420	570	285	353	263	61	118	212	257
Connection size, flange (mm)	100	150	200	300	150	200	100	30	50	80	100
Max flow rate, (kg/s)	50	80	160	450	80	170	50	3.5	15	20	50
Max temperature, (ºC	180	180	180	180	180	180	160	160	160	160	160
Max pressure, (barg)	16	16	16	16	16	16	16	16	16	16	16
Flow principle	Parallel	Parallel					Parallel	Parallel	Parallel	Parallel	Parallel



Plat And Gasket


Plates can be obtained in all pressable materials. The most common materials are: stainless steel AISI 304, AISI 316,and titanium. Gaskets are available in a wide range of elastomers. The most common are: nitrile and EPDM.

Max pressure and temperature

All models are available with different framedesigns and different plate thickness depending on the required design pressure. The maximum temperature depends on the gasket material used,and the working pressure.

Connection Type

Threaded pipe connections are available in stainless steel and titanium, and Flange connections are available unlined or with linings in rubber, stainless steel, titaniumor other alloys depending on model.